Thailand: Two-Bedroom Condos: Usable Space Behind the Label
Let’s explore this page together
Published · Updated
Why a two-bedroom label does not tell you how it lives
Imagine choosing between two listings, each with a “2 Bedrooms” badge. The plan from The Origin Ladprao 15 identifies Type C as a 45.50 sqm two-bedroom home. Grene Chaengwattana calls its B1 layout a two-bedroom as well, with 59 sqm of stated saleable area. That sounds like a straightforward size comparison until you try to place an actual bed, a school desk and storage in the smaller room. Neither headline tells you whether that combination works.
A room can be counted as a bedroom on a sales drawing yet remain awkward for your intended use. The drawing may show a bed neatly centred between walls, even though its outline says nothing about mattress size, wardrobe clearance or the space needed to pull out a chair. A door that looks harmless on a thumbnail may have to swing across the very part of the floor where the desk would go. These are ordinary daily problems, especially when the second bedroom must serve more than one purpose.
The rest of the apartment competes for space too. Two bathrooms, a generously sized living room, a deep balcony and a separate corridor can all be legitimate design choices. They just have different consequences for a three-person household than they do for a couple who host guests occasionally. More space in the brochure is not necessarily more useful space in the child's room, and an efficient smaller plan is not automatically comfortable either.
What the advertised area does and does not include
One label in the Grene Chaengwattana B1 drawing deserves attention: “SALEABLE 59 SQ.M.” The developer is telling readers which area term it has used, but the graphic alone does not define the boundaries of that measurement. Origin's Type C brochure gives “2 BEDROOM 45.50 SQ.M.” without an equally explicit area-basis label next to the type. You cannot assume those figures were calculated in the same way. Nor can you assume that a balcony is always included, or always excluded, whenever a Thai developer uses the word saleable.
There are several layers of area information. A marketing plan identifies a product and its quoted size. A reservation or sale agreement describes what the parties have agreed to buy. Registration records describe the property held under a particular title. Clear internal dimensions, meanwhile, answer a different question: how far is it between the finished walls where a bed or wardrobe must fit? Even a title showing a unit's area does not establish the usable length of one bedroom after a column, fitted cabinet or door swing is accounted for.
Consider a 50 sqm advertisement. Subtracting an estimated balcony area from 50 and calling the remainder “usable living space” would skip two essential steps. First, you would need documentary confirmation of whether that outside area is included in the original 50. Second, you would need to define what your remainder is supposed to measure. Indoor floor area, clear bedroom floors and space genuinely available for new furniture are distinct concepts. A corridor is indoors but may be necessary for access; a kitchen recess may be productive space despite being too narrow for a free-standing cabinet.
What actual Thai two-bedroom floor plans show
Grene Chaengwattana offers a particularly instructive source because its developer-published B1 image contains dimension lines, not just furniture illustrations. It is explicitly marked “UNIT B1”, “2 BEDROOM” and “SALEABLE 59 SQ.M.” The larger dimension chains include 7,800 mm and 8,300 mm marks. Around the right-hand bedroom, the drawing shows a 2,900 mm horizontal segment and a 2,700 mm vertical segment. These annotations establish that dimensioned geometry exists for this specific layout. They do not, on their own, certify a 2.90 by 2.70 metre clear finished bedroom. Multiplying the two larger strings as a simple indoor rectangle would be wrong: they describe different parts of the outline.
Origin ICONIC Black & White Ladprao 15 provides the other named plan. The developer brochure calls it Type C, with two bedrooms and 45.50 sqm. That is a defined product rather than a project-wide band, so it belongs in a two-plan comparison. The available brochure evidence does not establish comparable, legible clear dimensions for the smaller bedroom. As a result, you can compare what the two developers published, but you cannot conclude that the extra 13.50 sqm shown for Grene translates into a particular gain in bedside or wardrobe clearance. The underlying area terminology is not established as equivalent either.
The Origin Sukhumvit 105 brochure supplies a useful third reference. It lists a two-bedroom format at 44.00–44.50 sqm. This is a range for variants, not a measured floor or bedroom in a selected apartment. AP Thailand's LIFE Sukhumvit–Rama 4 page lists 50–60 sqm for its two-bedroom category; elsewhere the same page gives 27.2–60.2 sqm for unit sizes across the development. Those two ranges must not be interchanged. AP also distinguishes one-bedroom-plus layouts from the two-bedroom category, an important reminder that a flexible extra room is not automatically part of the same comparison.
Dates and revisions are as important as the attractive plan labels. The drawing date or revision for Grene B1 has not been reliably established from its public image. A PDF stored on a developer's website may describe an earlier product release, while the current apartment available for sale may have a different revision or fitted layout. For a completed home, site measurements can resolve much of that uncertainty. For one still being sold from plans, the reservation documents must identify the exact drawing being relied on. These few published unit types are real examples, not evidence for a Thai market-wide average or a ranking of developers.
Two floor plans: what the dimensions actually confirm
Plan A is Grene Chaengwattana Unit B1, labelled SALEABLE 59 sqm. Plan B is Origin ICONIC Black & White Ladprao 15 Type C, labelled 45.50 sqm. Both are identifiable developer types, but the published area bases and clear room measurements are not fully comparable.
| Metric | Plan A | Plan B |
|---|---|---|
| Project / unit type / plan date | Grene Chaengwattana, B1; drawing undated | Origin Ladprao 15, C; drawing undated |
| Published unit area, sqm | 59; labelled SALEABLE | 45.50; Type C |
| Area measurement basis | SALEABLE label; basis not defined | Measurement basis not stated |
| Balcony / terrace | Separate area not stated | Separate area not stated |
| Second-bedroom dimensions | 2,900 and 2,700 mm strings; not clear sizes | Clear dimensions not verified |
| Wardrobe zone and bed fit | Bed and wardrobe shown; sizes unknown | Furniture fit not established |
| Circulation and door swings | Doors drawn; passage not measured | Clear passage not verified |
| What remains unverified | Finished widths, 59 sqm breakdown, revision | Room dimensions, 45.50 sqm basis, revision |
Will a bed, wardrobe and clear passage actually fit?
Start with the bedroom on the right side of Grene's B1 plan. Its neighbouring dimension strings read 2,900 mm and 2,700 mm. That is a concrete advantage over an advertisement containing nothing but a room name. It is still necessary to establish precisely where those strings start and end. A structural or layout dimension can include a wall thickness or run to a face that will later receive finishes. If you want to know whether a wardrobe fits beside a bed, the measurement you need is the unobstructed distance at that exact location in the completed room.
For illustration, take a single bed 1.20 metres wide and 2.00 metres long, a wardrobe 0.60 metres deep and a desk measuring 1.00 by 0.50 metres. These are chosen furniture sizes for a household scenario, not items specified for B1 and not statutory standards. Suppose a later, reliable measurement showed a clear width of exactly 2.90 metres where the bed and wardrobe would sit side by side. Subtracting 1.20 and 0.60 would leave 1.10 metres along that one line, before allowing for door leaves, trim or a projecting column. The 1.10 metres is a hypothetical arithmetic result; it is not a measured passage in Grene B1.
Now change one item and the layout changes. A hinged wardrobe needs space for its doors to open, while sliding panels impose different access constraints. A bedroom door can cut across the wardrobe's usable frontage. The desk might fit against a wall while leaving no room to pull back a chair. A window that seems ideal for daylight may become difficult to reach after a tall cabinet is installed. Even a properly drawn overall room rectangle may conceal the impact of a shallow service recess or an air-conditioning unit.
Door movement deserves a separate look because furniture catalogues rarely show it. An inward-opening bedroom door requires an arc of floor to remain clear. A bathroom door outside that bedroom can affect how furniture is carried through the apartment, and a narrow hall can become an obstacle long before anyone reaches the room. An appealing rendering can make these encounters disappear by choosing smaller illustrative furniture. It should never be treated as proof that the household's own bed or wardrobe will work.
Common mistakes and how to fix them
What it costsYou may overestimate the child’s room and its storage capacity.
What to do insteadGet the developer’s area definition and the dimensioned room plan.
What it costsAn invented width can put your chosen bed in the door’s swing.
What to do insteadUse stated drawing dimensions or on-site measurements, never pixels.
What it costsThe actual bed or wardrobe may block the route that the illustration leaves open.
What to do insteadOverlay real furniture sizes and opening clearances on the dimensioned plan.
What it costsThe extra space may not function as an enclosed private bedroom.
What to do insteadVerify the developer’s unit category, enclosure and independent door.
What it costsA door leaf or service box can take the only space available for a desk.
What to do insteadReview door swings and service drawings, then measure clearances.
What the second bedroom can realistically be used for
The second bedroom has to be judged by its job, not its name. For a child, that job may combine sleeping, homework, clothing and toys. An arrangement that fits today's toddler bed may be much harder with a full-length bed and a proper study chair. What counts is a usable stretch of wall and enough clear floor for a normal sequence of activities, including opening drawers and getting out of the room.
Two adults who require separate sleeping spaces have a different threshold. Each room needs a door that can close without hitting the bed, access to essential storage and a route that does not depend on moving furniture. A plan labelled two-bedroom is a better starting point than an unverified listing, but it cannot prove privacy or noise isolation. Window location, partitions and the actual condition of the completed unit may all affect the result.
For a full-time office, chair clearance often decides whether the desk works. It must move back far enough for someone to stand up; the screen should be placed where the person can work comfortably; and the room door may need to remain closed during calls. A room that works as an occasional home office may fail if it is also expected to store luggage and accommodate an overnight guest. That is a use conflict, not necessarily a defect in the apartment.
Occasional guests allow more flexibility. A folding bed or sofa bed might leave the room free for storage or work most of the year, provided the owner accepts the compromise when visitors arrive. Long-term occupation by another adult is a different proposition, requiring the room to work every day. AP Thailand explicitly advertises a one-bedroom-plus category separately from its two-bedroom layouts. The extra zone in such a plan should not be quietly counted as a second enclosed bedroom without checking the actual drawing and room configuration.
Which option fits your situation
Conditional until the bed, desk and wardrobe can be tested together against clear dimensions.
A two-bedroom label alone does not prove privacy or circulation.
A guest bed changes the clearance test and may alter the verdict.
Occasional overnight use is a weaker test than permanent occupation.
How to verify room sizes before committing
When a condominium is still being built, the most useful paper is often a rather unglamorous drawing: the dimensioned plan for the exact layout revision being offered. A project brochure can contain several mirrored or modified types. The reserved unit may also differ by building, floor, structural projection or balcony shape. Linking the drawing to the actual apartment number prevents a discussion about one layout from being mistaken for an agreement about another.
The sale documents then serve a separate purpose. Thailand's Department of Lands Aor. Chor. 23 form includes a field for the condominium unit's approximate area, alongside identifying details. It is not a bedroom measurement certificate. The Office of the Consumer Protection Board has published guidance describing condominium sales as a category subject to contract controls. That guidance, including the older linked publication, is a reason to read the applicable Thai contract and attachments carefully, not an assurance of an automatic remedy if the final measurements differ from a brochure. Contract area, revision references and the agreed fixtures need to be clear for the specific transaction.
There is also the registration record. A Department of Lands registration guide describes floor plans and supporting details for individual units, and the published English reproduction of section 21 of the Condominium Act says a unit title includes its location, area and a plan showing width, length and height. Those records establish the identity and documented geometry of a property at a legal level. They do not tell you how wide the walking space is between a child's installed bed and an opened wardrobe. A recorded unit area and a site measurement between finished walls answer complementary questions.
For completed homes, clear measurements taken between finished surfaces give an essential physical check alongside the title plan. If a plan, reservation sheet, sale contract and title give different figures, the consequences depend on the documents and applicable rules for the specific unit. There is no basis here for promising compensation, a fixed tolerance or the universal right to obtain every marketing drawing. The goal is more modest and much more useful: know which version you are choosing, what its quoted area means, what is included in the handover, and whether the room you need actually accommodates your furniture. A two-bedroom badge cannot answer those questions for you.
Document checklist
Before comparing layoutsChecklist0 of 3
Before reservation and contractChecklist0 of 3
For a completed unit or at handoverChecklist0 of 2
Expert view

The word two-bedroom tells me very little about how a household will use the smaller room. I care about the space left after a real bed, a wardrobe and a fully opened door. A large number on a brochure can hide a narrow room — The opposite is possible when circulation is compact and storage is placed well. A child’s room must accommodate changing needs, not just today’s mattress. An office needs a desk that can be used with the door shut. The drawing should provide clear dimensions for the actual unit type, with the balcony and fixed fittings accounted for. If those details are missing, calling the layout family-friendly would be premature.
Sources and check dates
Sources5
- Thailand Department of Lands — Registration of Condominium where Land or Building is Encumbered (ENG-No.5)
Official condominium registration guidance for encumbered property requires floor-by-floor drawings with unit dimensions and areas; it does not validate a marketing bedroom plan.
- Thailand Department of Lands — Condominium Unit Sale and Purchase Agreement (Aor. Chor. 23)
Official Aor. Chor. 23 form includes a field for approximate area of the identified unit; it does not establish usable furniture clearances.
- Thailand Condominium Act, sections 20–21 (Siam Legal reproduction)
Secondary English reproduction of sections 20–21: the title contains unit area and a dimensioned plan. Legal reliance requires the official Thai text.
- Origin Property — The Origin Sukhumvit 105 brochure
Developer brochure lists a 44.00–44.50 sqm two-bedroom range; it is not a measured clear bedroom dimension.
- Origin Property — ICONIC Black & White Ladprao 15 brochure
Developer brochure explicitly labels Type C as 2 BEDROOM 45.50 SQ.M.; clear second-bedroom dimensions and drawing revision are not established.
Useful next reading
A practical second opinion
Need help assessing a specific property?
Send the property link, price and your goal. We will separate the documented facts from the points that still need a property-specific check.
What to send: link, budget and target date