Usable Space in Compact Bangkok Condo Layouts
Let’s explore this page together
Published · Updated
What the headline square metres leave out
A room can look generous on a floor plan and still fail at the moment someone opens a wardrobe. The empty patches between a bed, a kitchenette and a dining chair do not necessarily connect. For anyone planning to live in a small Bangkok condo every day, the relevant question is whether the space still works when two activities happen at once: one person is making coffee while another wants the bathroom, or a desk chair is pulled back as someone heads for the balcony.
Two layouts published by LPN make the distinction tangible. At Lumpini Ville Sukhumvit 101/1 – Punnawithi, the open-plan Standard is advertised at 24 sq m and the separate-bedroom plan at 28 sq m. The drawing labels the sleeping-side width as 2.85 m in the former and 2.65 m in the latter. So the larger home does not give its bed a wider strip of floor. Its extra area is distributed differently, including a partitioned sleeping area and changes to the surrounding rooms.
Those measurements are useful, but their meaning is narrower than it first appears. The developer's diagrams say the dimensions are approximate and taken from wall centrelines. A centreline distance is not a finished-wall clearance. Neither the headline area nor the illustrations establishes a measured internal floor polygon, the precise balcony allocation, or the clear opening of an installed door. Subtracting furniture footprints from 24 or 28 sq m would produce a precise-looking number with no reliable meaning for circulation.
Think instead about movement between actual destinations. Can you get from the entrance to the sink, the bathroom and the sleeping area without crossing a chair's occupied position? Is the wardrobe usable with its door open? Is there somewhere to stand when unloading a washing machine? The LPN drawings allow a limited, repeatable furniture test. They do not certify the narrowest continuous path inside any particular completed apartment, and the comparison below keeps that uncertainty visible.
Which drawings are actually measurable?
For this comparison, the most useful pair comes from one developer rather than two unrelated listings. LPN's published floor-plan gallery for Lumpini Ville Sukhumvit 101/1 – Punnawithi, in Bangkok's Phra Khanong district, contains a Standard 24 sq m arrangement and a 28 sq m one-bedroom. The Standard plan shows a continuous sleeping and living area. Its marked horizontal segments are 2.85 m and 2.25 m, with 3.55 m and 1.30 m marked on the other axis. On the one-bedroom diagram, a partition and doorway form a distinct sleeping room; the labelled segments are 2.65 m and 2.45 m horizontally and 4.05 m and 1.60 m vertically.
Both images are accessible in the developer's Floor Plan section. They carry an important qualification: distances are approximate and measured to the centres of the walls. As checked on 11 October 2026, the published versions did not identify a particular apartment number, tower, floor or signed drawing revision. A clear distance across a finished bedroom will differ from a wall-centre dimension. The drawings therefore support a comparison of geometric constraints on the illustrated types, not a guarantee about a resale unit or an apartment handed over by the developer.
There are other worthwhile references, but they serve different purposes. PropertyHub reproduces a dimension-annotated Studio image for IDEO Mix Sukhumvit 103 without establishing the drawing revision for an individual unit. Estopolis describes two 29 sq m one-bedroom arrangements at The One Plus Condominium, with reported frontages of 5.15 m and 4.30 m: a useful reminder that equal area can take different shapes, although neither frontage is automatically a finished internal width. Supalai's own gallery at Supalai Lite Tha Phra–Wongwian Yai distinguishes its approximately 28 sq m studio family from one-bedroom designs but does not, merely by labelling them, demonstrate where a full-size wardrobe opens.
The LPN pair is used because the same furniture can be placed against clearly identified dimension labels in both diagrams. It is not a like-for-like area match—the one-bedroom advertises four additional square metres. Nor is it an as-built measurement exercise. Where a published line stops short of proving the position of a wall face, a door swing or a service connection, the result below is deliberately conditional. That is a stronger basis for a purchase decision than treating a neat rendering as a surveyed room.
What two compact layouts can really hold
LPN Standard 24 sq m versus 1 Bedroom 28 sq m: developer type diagrams, approximate wall-centre dimensions, no unit number or revision. Source: LPN Floor Plan; checked 11 Oct 2026. Conditional test: VIHALS 156×206 cm opposite a PAX 100×58 cm frame with a 49.5 cm FORSAND leaf opened approximately 90°. “At most” is an optimistic centreline calculation, never an as-built walking width.
| Function | Studio | One bed |
|---|---|---|
| Unit type / drawing | LPN Standard 24 sq m; open plan | LPN 1 Bedroom 28 sq m; separated room |
| Area basis / date | 24 sq m advertised; internal floor unmeasured | 28 sq m advertised; internal floor unmeasured |
| Bed / access | VIHALS 156×206; 285 cm centreline span; access unknown | VIHALS 156×206; 265 cm centreline span; access unknown |
| Wardrobe / doors | Opposite bed: at most 71 cm; door open: at most 21.5 cm | Opposite bed: at most 51 cm; door open: at most 1.5 cm |
| Desk / chair | 120×60 cm desk; chair clearance unverified | 120×60 cm desk; chair clearance unverified |
| Kitchen / fridge | Kitchen depicted; LAGAN 55×57 cm fit unknown | Kitchen depicted; LAGAN 55×57 cm fit unknown |
| Laundry / access | Washer symbol; services and access unknown | Balcony/laundry drawn; installation unknown |
| Narrowest route | Unconfirmed: no finished clear route dimensions | Unconfirmed: no finished clear route dimensions |
Where the bed, wardrobe and desk collide
Start with actual products instead of the little rectangles drawn into a sales brochure. IKEA's VIHALS frame for a 150 × 200 cm mattress measures 156 × 206 cm on the outside. The storage item in this test is a PAX frame 100 cm wide and 58 cm deep, fitted in the hinged-door scenario with FORSAND doors measuring 49.5 cm across. The desk is IKEA's 120 × 60 cm LAGKAPTEN/ADILS. Manufacturer specifications were checked on 11 October 2026, and no item changes between the two homes being tested.
A revealing arrangement places the bed with its 156 cm width projecting into the sleeping strip from one long wall and the 58 cm-deep wardrobe directly opposite it. This is a proposed replacement if the drawing already suggests an existing wardrobe, not an extra cabinet added on top. In the Standard 24 diagram, the relevant wall-centre span reads 285 cm. Subtracting the two product dimensions gives 285 − 156 − 58 = 71 cm. The one-bedroom's corresponding span reads 265 cm, leaving 265 − 156 − 58 = 51 cm on the same basis. Because LPN dimensions are approximate wall-centre measurements, both figures are optimistic limits for this hypothetical alignment, not measured clearances in finished rooms.
The difference becomes decisive when a wardrobe door moves. A 49.5 cm FORSAND leaf opened roughly perpendicular to the wardrobe front would leave, on those optimistic figures, at most 21.5 cm between its leading edge and the bed in the Standard layout. In the separated bedroom the remainder falls to approximately 1.5 cm. Those are transparent arithmetic checks of the furniture arrangement, not claims about the exact position of a fitted door in a completed apartment. Either way, someone cannot keep using that strip as a walking route while the wardrobe is open. Relocating the cabinet or choosing compatible sliding doors might resolve this particular clash; neither remedy can be certified from the brochure alone.
A workstation demands a different kind of allowance. Put the 60 cm-deep desktop opposite that same bed, and the corresponding centreline remainders become 69 cm and 49 cm respectively, before a chair is pulled out. Sitting at the desk and passing the bed are separate activities that compete for the same floor. The one-bedroom diagram does label a longer sleeping-side dimension, 4.05 m against the Standard's 3.55 m, so another wall arrangement could be possible. We cannot establish its feasibility without the exact usable wall lengths, wardrobe position and bedroom door sweep.
It is also worth distinguishing an illustrated cabinet from one supplied with a property. A handover specification might already include fitted storage, in which case the test should use that cabinet's measured dimensions and its real opening mechanism. A bare unit would need a separate furniture plan. No continuous walking width can be asserted here, but one concrete failure mode is clear: a bed and a hinged wardrobe can appear to fit on paper while the wardrobe, when used, removes the only adjacent strip of space.
Common mistakes and how to fix them
What it costsThe bed arrives larger than the mattress outline and eats into the space reserved for access.
What to do insteadUse VIHALS’s full 156×206 cm external footprint against finished-wall measurements, not the 150×200 cm mattress.
What it costsScaling by eye can make a cabinet look as though it fits across a wall segment that has never been measured.
What to do insteadUse dimensioned drawings that say where measurements start and end; obtain an actual measurement if the image has no reliable scale.
What it costsSeveral empty floor patches can still leave no continuous route past the bed or an occupied desk.
What to do insteadTrace one continuous route to the bathroom, kitchen and balcony with furniture in place, then measure the pinch point between finished surfaces.
What it costsThe wardrobe footprint fits but its hinged door or a pulled-out desk chair blocks the route.
What to do insteadDraw the opening sweep of the chosen 49.5 cm FORSAND leaf and the actual drawers; test the route with them in use.
What it costsA washer may stand inside a drawn balcony rectangle yet lack water, drainage, access or installation permission.
What to do insteadGet the water, waste and power layout plus the building’s installation rules; compare them with the specific washer’s installation instructions.
Cooking and laundry are the real stress test
Both LPN examples put the kitchen close to the entrance, with access towards the living and sleeping areas. The drawings establish that general relationship; they do not provide a fit-out schedule, a measured run of uninterrupted worktop or the space in front of every lower cupboard. An installed sink and cabinet already occupy the floor they sit on. Subtracting a second imaginary kitchen cabinet from the available area would be counting the same obstruction twice.
For a reproducible alternative fit-out, consider IKEA's METOD base cabinet, 60 cm wide and 60 cm deep, alongside its small freestanding LAGAN fridge, 55 cm wide, 57 cm deep and 83.2 cm high. Their nominal widths add up to 115 cm before installation allowances. The LPN diagrams show a 2.25 m marked segment on the Standard's living/kitchen side and 2.45 m on the one-bedroom's side, but neither is identified as an uninterrupted run of empty wall. Doors, the sink and the already drawn cabinets interrupt that space. A 55 cm-wide fridge should therefore be treated as **not verified to fit either actual kitchen**, even if its footprint sounds modest. Its hinge side and ventilation requirements are as consequential as its width.
The washer is a still sharper example of the difference between a product dimension and an installation. Samsung specifies the WW10DB7U94GBST front-loader at 600 × 850 × 595 mm, width by height by depth. These are cabinet dimensions. They exclude the practical space needed for its door, supply and waste hoses, service access and any installation conditions. LPN's one-bedroom illustration marks a balcony/laundry area, and the Standard drawing also shows a washing-machine symbol near the outdoor end of the unit. Those marks are leads to investigate, not evidence that a particular 10 kg washer can be fitted or that the condominium permits it there.
Appliance access changes the way a small home functions throughout the day. A fridge door may cut across the line between the sink and cooking space. A front-loading washer might require someone to stand where a balcony door opens. A base cabinet drawer can temporarily claim the only strip connecting the kitchen and bathroom. Even when a machine can stand within the outlined rectangle, its connection and maintenance can fail for reasons the plan never depicts.
For someone who cooks daily and does laundry at home, the verified location of plumbing and the clearances around actual appliances can outweigh an attractive separation between living and sleeping. For someone who rarely cooks, another wall might be more valuable for a workstation. Neither judgement requires pretending that the illustrated kitchen or washer is part of every unit's delivery specification. The documents below separate what is physically drawn, what is supplied and what may legally and technically be installed.
Document checklist
Drawing for the exact unitChecklist0 of 3
Fit-out and appliance specificationsChecklist0 of 3
Installation and accessChecklist0 of 4
Does a bedroom wall improve the way you live?
A door to the bedroom can make a modest home function like two spaces. One person gets to sleep while the other has a video call or prepares breakfast. That is a real advantage for some households, but it comes with geometry: a partition divides long walls, creates a doorway and can push storage into an already busy living area. In the two LPN examples, the 28 sq m one-bedroom has a narrower labelled sleeping-side span than the 24 sq m Standard. More total floor area has not guaranteed more room beside the bed.
A single resident with little furniture may get more value from the continuous open room. A bed can share the space with a small dining arrangement, and there may be greater freedom to change the position of a desk or cabinet. Yet openness is not a guarantee of flexibility. The Standard still has a kitchenette, a bathroom enclosure, an entrance and a balcony opening. Those are fixed interruptions, regardless of whether the rest of the room lacks a bedroom wall.
For two people whose routines do not align, the closable bedroom is often worth protecting. It needs to work with the furniture actually intended for it. If opening the wardrobe creates a bottleneck at the bedside, someone may have to move away from the bed every time the other person needs clothes. The PAX/VIHALS test shows that precise trade-off in a possible arrangement of LPN's 28 sq m bedroom. It does not rule out other positions or a differently configured wardrobe. It does rule out choosing solely because a plan is labelled '1 Bedroom'.
Working from home every day changes the priority again. The 120 × 60 cm desk is only its starting footprint. With the chair occupied, another person still needs a route between the kitchen, bathroom and sleeping area. A separate bedroom can preserve privacy if the workstation fits outside it; a studio-style plan can offer a longer combined wall but less acoustic separation. The better option is the one with a demonstrably usable desk position and a clear route while someone is seated.
Storage-heavy households may reach a different answer from both groups. Suitcases and sports equipment demand more than a nominal cupboard symbol, and a wardrobe with inaccessible doors has little practical value. These illustrations suggest what to investigate, not a universal preference for either layout type. The choice depends on which daily activities need to happen together, which wall lengths are truly available and whether each door can operate after the full furniture set is installed.
Which option fits your situation
A continuous room can suit light storage, provided the bed and wardrobe leave a usable route. The “studio” label alone proves nothing.
A bedroom door can separate rest from activity, but opening the wardrobe must not trap someone at the bedside.
The 120×60 cm top is not the full workstation. Movement past an occupied chair may favour either type of plan.
LPN’s 71/51 cm optimistic calculations reveal the bed–wardrobe trade-off, not the final fit of suitcases or gear.
Where the floor-plan evidence runs out
The numbers in this article come from LPN's published unit-type illustrations, not a survey of an apartment offered for sale. The developer labels the dimensions approximate and measured from wall centrelines. We do not have signed revisions for identified unit numbers, finished-wall widths, the precise position of every built-in, or confirmation that a particular unit has not been mirrored or altered. The 71 cm and 51 cm figures describe one transparent furniture arrangement against the labelled spans. Neither is a certified circulation width. The tightest continuous route from front door to bathroom or balcony remains unmeasured.
The same limit applies to appliances in a different way. A 600 × 850 × 595 mm washing-machine body might occupy a rectangle on paper without a viable drain, an appropriate socket, clearance for its door or access for servicing. A balcony symbol cannot establish building permission for installation. Cabinet and refrigerator measurements likewise do not prove that a kitchen wall is unobstructed. This is a furniture-fit exercise, not a building inspection, a Thai code compliance assessment or permission for alterations.
What can be concluded is useful but specific: with a hinged PAX opposite a VIHALS bed, opening the wardrobe consumes almost all of the optimistic gap in the illustrated one-bedroom sleeping strip, and severely reduces it in the open plan too. Another arrangement may work. Before reserving, furnishing or signing a long lease, the deciding evidence is the current drawing for the exact apartment, the finished dimensions and the handover and appliance-installation details. Where those are missing, the right answer is still 'not confirmed'.
Expert view

A floor plan earns my trust when it explains what happens after the wardrobe opens — The published square metres alone say very little about that moment. A bedroom partition can provide welcome privacy, but its doorway is also a permanent interruption in the usable wall. Shafts, kitchen connections and bathroom openings are harder to move than the furniture shown in a sales image. I put the path from the bed to the bathroom ahead of an extra few square metres on the brochure. The bed must be measured by its frame, and the wardrobe by the way its doors operate. If either of those facts is missing, apparent spare floor should stay unconfirmed. A useful layout is one whose everyday movements have been demonstrated for the specific apartment.
Sources and check dates
Sources5
- LPN Development — Lumpini Ville Sukhumvit 101/1–Punnawithi, official floor-plan gallery
Developer floor-plan gallery for Standard 24 sq m and 1 Bedroom 28 sq m with labelled segments. Approximate wall-centre dimensions, no signed revision or identified individual unit.
- LPN Development — official 28 sq m one-bedroom annotated layout image
Primary image of the type labelled 2.65/2.45 m and 4.05/1.60 m, explicitly approximate and measured from wall centrelines.
- Lumpini Ville Sukhumvit 101/1 — Standard 24 sq m annotated layout, mirrored by Hipflat
Secondary-hosted copy of the Standard 24 sq m annotated diagram: 2.85/2.25 m and 3.55/1.30 m. Cross-referenced to LPN; not an individual unit survey.
- LPN Development — current official English project profile and address
Confirms project in Bang Chak, Phra Khanong, Bangkok, and the studio/one-bedroom categories; not the dimensioned drawings.
- PropertyHub — IDEO Mix Sukhumvit 103 Studio plan
Secondary publisher of an annotated Studio layout; does not establish revision or as-built dimensions for a specific unit.
Useful next reading
A practical second opinion
Need help assessing a specific property?
Send the property link, price and your goal. We will separate the documented facts from the points that still need a property-specific check.
What to send: link, budget and target date